Y-cam Classic Range - Manual (Page 34)

Page 34
6.23 PPPoE Setup
The Y‐cam can be installed without a PC on the network. Some XDSL services use PPPoE (Point‐to‐Point Protocol over
Ethernet).
[PPPoE dial‐up] Enable or disable for PPPoE connection
[Service name]
Enter your ISP name or class of services that are configured on the PPPoE service. This field may
be left empty.
[User name]
Type your user name
[Password]
Type your password
[Re‐type password]
Re‐confirm password.
Click “Apply” to confirm your settings.