Y-cam Classic Range - Manual (Page 16)

Page 16
4.3 Finding your Camera with Y‐cam Setup
Now you have your camera attached and the software ready, you are ready to find your camera on your network.
Double‐click the Y‐cam icon on your Desktop to launch the Y‐cam Setup program.
The Y‐cam Setup utility should automatically find your camera if it is correctly connected (See image below).
Sometimes the program may take a few minutes to find your camera, so if your camera isn’t displayed, wait a few
moments and then click “Refresh” to search for cameras again.
[Setup] ‐ Select the required camera and click Setup to configure the network settings for the camera.
[Open] ‐ Select the required camera and click Open to access the camera via a web browser (same as double click)
[Exit] ‐ Click Exit to exit the Camera Setup window.
Anytime you lose the IP address of your Y‐cam camera, you can run the Setup Software to easily find it again.
Once your camera is displayed, either chose “Open” to open the camera, or a shortcut is to just double click on the
camera you want to view.