Y-cam Classic Range - Manual (Page 27)

Page 27
your connection speed and network traffic. If you are experiencing jerky video it may be necessary to decrease the
bitrate. For the Mobile Stream, the bitrates are listed alot lower but retain the same principle.
[MJPEG Quality] This sets the quality of the video on a non‐Internet Explorer browser. It can be from 20 to 100 where
100 is the best quality.
[Snapshot Quality] The quality of the snapshot saved using Live View page (Internet Explorer only). It also affects the
quality of the snapshot to be uploaded to an FTP Server. It can be from 20 to 100 where 100 is the best quality.
[Audio] Enable or disable the audio of the associated stream.
[RTSP authentication] Enable or disable MPEG4 RTSP authentication. RealPlayer can be used to view the live stream
from the Y‐cam, but RealPlayer does not support authentication, so the authentication of MPEG4 RTSP should be
disabled. This however may expose the camera to unauthorised access. QuickTime Player, on the other hand, supports
authentication and can be used to view the live stream.
Tip: Clicking on the name of the stream will display the various paths to the particular video stream.