Y-cam Classic Range - Manual (Page 26)

Page 26
6.12 Stream Setup
Click on Stream Setup under the Camera Menu to change the streaming settings for your camera. This is useful if you
require a certain size of video stream, a certain quality, or different streams for different devices (such as laptop or
mobile phone).
Default settings will normally suffice for most users.
There are 3 video streams available. You can configure settings for the primary and an optional secondary video stream.
Configuring a secondary stream is useful for providing a video stream that is at a lower resolution than the primary
stream to third‐party devices or software. Some devices and software require lower resolution.
The Mobile stream is similar to the first two streams but is purely for mobile viewing and has a fixed resolution.
Stream Setting Options
[Preset] There are five pre‐programmed stream profiles for quick set‐up. Please choose the one according to your
bandwidth.
[Image size] Three image resolutions available: 640 x 480(VGA), 320 x 240(QVGA), 160 x 120. The mobile stream has a
fixed image size of 176x144.
[Frame rate] Twelve options: 1/2/3/4/5/6/8/10/15/20/25/30 frames per second (fps). The frame rate is automatically
determined by the camera and this depends on the network bandwidth available at the time. This frame rate setting
imposes the maximum frame rate that the camera will transmit.
[MPEG4 Bitrate] Eight options: 64, 128, 256, 512, 768, 1024, 1536, 2048 (kbps). The above three settings determine the
image quality, however higher bitrates require greater bandwidth. Please select the appropriate settings according to