beautypg.com

WEATHER GUARD Model 283 EZ-GLIDE® System, Driver Side, 8 ft Hi-Cube Vans User Manual

Page 5

background image

STEP 1
Slide a White Plastic Bushing (A)
into the Pivot Arm (B) as shown.

(A)

(B)

STEP 2
Use the supplied lubricant and coat the pre-assembled
Black Plastic Bushing (A). Insert the Driveshaft/Handle
Assembly (B) into the larger Black Plastic Bushing (C)
in the Rear Cross-Member Assembly (D) and through the
White Plastic Bushing in the Pivot Arm (Step 1) so that the
black bushings are fully seated.

(B)

(C)

(D)

STEP 3
Align holes in the Pivot Arm, White Plastic Bushing, and
Rear Drive Tube. Install the 3/8-16 x 2-1/4" Fastener. Next
install the 5/16-18 x 1" Fastener as shown.

* 3/8-16 x 2-1/4"
Hex Hd. Bolt

(A)

5/16-18 x 1"
Hex Hd. Bolt

3/8-16 Nylon
Lock Nut

(2) 3/8"
Flat Washer

5/16-18 Nylon
Lock Nut

(2) 5/16"
Flat Washer

NOTE: Tighten all marked (*)
fasteners to 200 in. lbs.

6

5