beautypg.com

Caution – WEATHER GUARD Model 283 EZ-GLIDE® System, Driver Side, 8 ft Hi-Cube Vans User Manual

Page 15

background image

STEP 22 (8 Places)
With unit centered side to side, mark the holes in the Mounting
base (A). Move the unit out of the way enough to drill the 5/16"
dia. holes. Reposition unit and secure to the van roof with the
5/16-18 x 1-1/4" Fasteners.

CAUTION

To keep debris out of your
eyes when drilling, always
wear protective eyewear.

NOTE: Seal the top of the bolts that go
through the roof with the sealant that is
supplied.

(A)

(8) 5/16
Rubber Washer

(8) 5/16"
Flat Washer

(8) Mounting
Pad-Rubber

(8) 5/16-18 x 1-1/4"
Hex Hd. Bolt

(8) 5/16-18
Nylon Lock Nut

(8) 1-1/2" OD
Fender Washer

Roof Rib

16

STEP 23
Assemble Upper Handle Section to Lower Handle
Section, Snap into position at a convenient height.
Handle is removable and should not stay on rack
when vehicle is in motion.
Store Handle inside vehicle when transporting

Insert Handle Assembly into rack and
turn clockwise to lock into place. To
remove from rack, push up, turn coun-
terclockwise, and pull.

adjust to desired length
and snap into place.

15