WEATHER GUARD Model 96115-3-01 Mesh Bulkhead, Compact, RAM CV - Manual

1/4-20 Blind Fasteners 4
1/4-20 x 3/4" Bolts 13
1/4-20 Nylon Lock Nuts 13
1/4-20 x 1-1/4" Hex Head Bolts 4
1/4" Flat Washers 16
1/4" Lock Washers 4
5/16-18 x 1-1/4" Bolts 4
5/16-18 Nylon Lock Nuts 4
5/16 Flat Washers 8
1/4-14 x 3/4" Self-Drilling Screw 2
Roof Mounting Angles 2
Mounting Plates 2
Blind Fastener Installation Tool 1
1/4-20 x 2-1/4" Hex Head 1
Black Bolt
• Installing your WEATHER GUARD ® Bulkhead for the RAM CV bulkhead is very
clear cut following these instructions.
• Before cutting or drilling in the floor, verify the location of you gas tank, fuel lines
and electrical cables so you don’t accidentally cut something important.
• Mount the upper corners of the bulkhead as close to the van inside walls as
possible for a sturdy and quiet installation.
• You can use the bulkhead with earlier model years of the Grand Caravan mini-
van, but you’ll need to trim the top corners of the mesh panel to fit. Make sure
not to obstruct airbag deployment, if the van is equipped with them.
Part No. 24-0320 REV. C ECN 5305 04/13
• Center Punch
• Electric Drill
• Hammer
• Utility Knife
• Pencil or Marker
• 1/8", 3/8" Drill Bits
• 3/8" Ratchet Driver
• 7/16" Wrench and/or socket (2)
• 1/2" Wrench and/or socket (2)
• 9/16" Open End Wrench
BULKHEAD for RAMCV
Model Number 96115-3-01