WEATHER GUARD 301 through 338 User Manual
Danger, Assembly and installation instructions pack rat
ASSEMBLY AND INSTALLATION INSTRUCTIONS
PACK RAT
®
Drawer Units - Model 301 through 338
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
DANGER
Danger of explosion. Do not use this product for storing or trans-
porting flammables, explosives, hazardous materials, or hazard-
ous waste, such as containers of gasoline, gas powered equip-
ment, solvents, gun powder, dynamite, propane tanks, acetylene
tanks and cutting torches. This product is only intended and safe
for use in storing and transporting small tools, equipment and
other similar materials. Any modifications made to, or unintended
use of this product, could create a hazardous condition that can
cause death, serious personal injury or property damage.
BOLT KIT
Bolt Kit #32-0115 is provided with
your PACK RAT® Drawer Unit.
Check this bolt kit to be sure the
following parts are included:
Quan.
Description
4
5/16-18 x 1" Hex Hd. Bolt
6
5/16-18 x 1-1/2" Hex Head
Bolt
1
5/16-18 x 2-1/4" Black
Oxide Bolt
6
5/16" Lock Washer
10
5/16" Flat Washer
4
5/16-18 Nylon Lock Nut
6
5/16-18 Blind Fastener
1
Blind Fastener Installation
Tool
2
5/16-18 x 3/4" Screw
2
5/16-18 Whiz Lock Nut
TOOLS REQUIRED
Screwdriver, common
Electric Drill w/ 3/8" & 1/2" Bits
Ratchet Wrench w/ 1/2" Socket
1/2" Open or Box End Wrench
9/16" Open or Box End Wrench
PARTS LIST
1 - PACK RAT® Drawer Unit
4 - Mounting Plates
1 - Rear Mounting Bracket
1 - Handle
Approximate Assembly and Installation time:
1 hour per unit (1.0 hrs.)
Depending on van or truck equipment installation experience.
The trademarked RED PUSHBUTTON is your assurance
of WEATHER GUARD® Equipment quality.
Part No. 24-0144 REV. B ECN 5285 03/13
- Model 338-5 PACK RAT® Drawer Unit, 48 in x 39-3/4 in x 12-1/2 in Model 338-3 PACK RAT® Drawer Unit, 48 in x 39-3/4 in x 12-1/2 in Model 337-3 PACK RAT® Drawer Unit, 48 in x 30 in x 12-1/2 in Model 336-3 PACK RAT® Drawer Unit, 48 in x 20 in x 12-1/2 in Model 335-3 PACK RAT® Drawer Unit, 48 in x 10-1/4 in x 12-1/2 in Model 334-3 PACK RAT® Drawer Unit, 48 in x 30 in x 12-1/2 in Model 312-3 PACK RAT® Drawer Unit, 24 in x 30 in x 9 in Model 310-3-01 PACK RAT® Drawer Unit, 42 in x 12 in x 17 in Model 308-5 PACK RAT® Drawer Unit, 48 in x 39-3/4 in x 9 in Model 308-3 PACK RAT® Drawer Unit, 48 in x 39-3/4 in x 9 in Model 307-3 PACK RAT® Drawer Unit, 48 in x 30 in x 9 in Model 306-3 PACK RAT® Drawer Unit, 48-3/4 in x 20-3/4 in x 9 in Model 305-3 PACK RAT® Drawer Unit, 48-3/4 in x 10-3/4 in x 8-3/4 in Model 304-3 PACK RAT® Drawer Unit, 48-3/4 in x 30-1/2 in x 9 in Model 303-3 PACK RAT® Drawer Unit, 40-1/2 in x 24-3/4 in x 12-3/4 in Model 302 PACK RAT® Divider for Model 301, 303 Model 301-3 PACK RAT® Drawer Unit, 24 in x 30 in x 12 in Model 300 PACK RAT® Dividers