WEATHER GUARD Model 96511-3-01 Window Bulkhead, Compact, Ford Transit Connect - Manual

1
INSTALLATION MANUAL
BULKHEAD FOR TRANSIT CONNECT
Model Number 96111-3-01 and 96511-3-01
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
WWW.WEATHERGUARD.COM
VAN STORAGE SOLUTIONS
FOR THE WAY YOU WORK TM
Part No. 24-0308 REV. C ECN 5315 05/13
TOOLS REQUIRED
• Center Punch
• Electric Drill
• Hammer
• Utility Knife
• Pencil or Marker
• 1/8", 3/8" Drill Bits
• 3/8" Ratchet Driver
• 7/16" Sockets
• 7/16" Wrench (2)
• 9/16" Open End Wrench
INSTALLATION TIME
Approximate installation time: 45 minutes
per unit depending on van equipment
installation experience .
PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION)
BOLT KIT
DESCRIPTION QTY.
1/4-20 Blind Fasteners 6
1/4-20 x 3/4" Bolts 15
1/4-20 Nylon Lock Nuts 13
1/4-20 x 1-1/4" Hex Head Bolts 4
1/4" Flat Washers 18
Floor Mounting Spacers 4
Blind Fastener Installation Tool 1
1/4-20 x 2-1/4" Hex Head
Black Bolt
1
Strap Mounting Angles 2
Mounting Straps 2
• Installing your WEATHER GUARD ® Bulkhead for the Transit Connect bulkhead is very clear
cut following these instructions.
• Before cutting or drilling in the floor, verify the location of you gas tank, fuel lines and electrical
cables so you don’t accidentally cut something important.
• Mount the upper corners of the bulkhead as close to the van inside walls as possible for a
sturdy and quiet installation.
*24-0308*