beautypg.com

WEATHER GUARD Model 283 EZ-GLIDE® System, Driver Side, 8 ft Hi-Cube Vans User Manual

Page 11

background image

USE THESE HOLES FOR DESIRED LENGTH

8'

5'

6'

7'

Front Pivot Arm

Rear Pivot Arm

STEP 13
Determine the length of rack you need.

FRONT TO REAR DRIVE TUBE ASSEMBLY

STEP 14
Locate desired front to rear length (5' or 6' or 7' or 8') and install
5/16-18 x 2" Fasteners (Tighten fasteners to 200 in. lbs.)

(4) 5/16-18
Nylon Lock
Nut

(8) 5/16" Flat
Washer

(4) 5/16-18 x 2"
Hex Hd. Bolt

STEP 15
Cover any exposed holes on Front and Rear Drive Tubes
with the 1" Dia. Vinyl Hole Covers

STEP 16
Seal the ends of the Center Drive Tube, the four 5/16-18 Fasten-
ers, and the two 3/8-16 Fasteners with the tube of sealant sup-
plied.

12

11