WEATHER GUARD Model 173-5-01 Pork Chop Box, Aluminum, Passenger Side, 3.4 cu ft - Manual

(1) Pork Chop Box
(2) Mounting Angle
(1) Floor Mounting Angle
(14) 5/16” Flat Washer
(3) 5/16” - 18 Blind Fastener
(1) Blind Fastener Installation Tool
(1) 5/16” - 18 x 2 1/4” Black Oxide
Hex Head Bolt
(3) 5/16” - 18 x 1 1/4” Hex Head Bolt
(6) 5/16 - 18 Nylon Lock Nut
(3) 5/16” Lock Washer
(6) 5/16” - 18 x 1” Hex Head Bolt
(2) Floor Mounting Spacer
• Drill with 3/16”, 3/8”, and 1/2” drill bits
• 1/2” open or box end wrench (qty. 2)
• 9/16” open or box end wrench
• Hammer
• Center Punch
• Carpenter’s square
• Pencil or marker
• Oil/Grease
Approximate installation time: 45 minutes (depending on truck equipment installation experience)
OPERATORS MANUAL
STEEL & ALUMINUM PORK CHOP BOX
MODELS 160-X-01 THRU 173-X-01
INSTALLATION TIME
TOOLS REQUIRED
PARTS LIST
WWW.WEATHERGUARD.COM
Read and understand all instructions and warnings before operating or using this product.
Danger of explosion. Do not use this product for storing or transporting explosives, hazardous materials, or hazardous
waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. This
product is only intended and safe for use in storing and transporting small tools, equipment and other similar materials. Any mod -
cations made to, or unintended use of this product, could create a hazardous condition that can cause death, serious personal
injury or property damage.
DANGER
–ATTENTION–
PRODUCT REGISTRATION
For your convenience,
place product registration
tear-off sticker here
Model #:_____________ Serial #:_______________
Purchase Date: __________________
Place of Purchase: _______________
Key Code: ______________________
Part No. 24-0176 REV. D ECN 5403 01/14