WEATHER GUARD Model 156-3-01 Saddle Box, Steel, Compact Standard, 6.4 cu ft - Manual

• •
(1) Saddle or Cross Box
(1) Tray with Dividers
(2) Level Holder Brackets (saddle box only)
(2) Rubber Mounting Pads
(2) Keys
(4) 5/16”-18 x 2-1/4” Hex Head Bolts
(4) Fender Washers
(4) Mounting Clamps
Approximate installation time: 30 minutes (1/2 hr.) depending on installer experience.
STEEL & ALUMINUM SADDLE BOX
STEEL & ALUMINUM CROSS BOX
MODELS 114-X-01 THRU 156-X-01
WWW.WEATHERGUARD.COM
Note: The rubber mounting pad comes as
a single piece and must be separated into
two pieces, one for each side of the truck.
Read and understand all instructions and warnings before operating or using this product.
Danger of explosion. Do not use this product for storing or transporting explosives, hazardous materials, or hazardous
waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. This
product is only intended and safe for use in storing and transporting small tools, equipment and other similar materials. Any mod -
cations made to, or unintended use of this product, could create a hazardous condition that can cause death, serious personal
injury or property damage.
For your convenience,
place product registration
tear-off sticker here
Model #:_____________ Serial #:_______________
Purchase Date: __________________
Place of Purchase: _______________
Key Code: ______________________
Part No. 24-0156 REV. D ECN 5403 01/14
OPERATORS MANUAL
INSTALLATION TIME
TOOLS REQUIRED
PARTS LIST
DANGER
-ATTENTION-
PRODUCT REGISTRATION
1/2” Rachet Wrench Ruler