WEATHER GUARD Model 347-5-02 Super Hi-Side Box, Aluminum, 11.8 cu ft User Manual
Danger, Warning, Installation instructions
BOLT KIT
Bolt Kit #32-0027 is provided with
Models 346 thru 365. Check
this bolt kit to be sure the following
parts are included:
Quan.
Description
1
1-3/4" Round Cap Plug
8
5/16" Lock Washer
14
5/16" Flat Washer
4
5/16-18 Blind Fastener
1
Installation Tool
1
5/16-18 x 3-1/4" Bolt,
black oxide
4
5/16-18 x 1-1/4" Hex Bolt
4
5/16-18 x 1" Hex Bolt
10
5/16-18 Nylon Lock Nut
2
"J" Bolt
2
Plastic Retaining Washer
2
Fender Washer
Bolt Kit #32-0028 is provided with
Models 372 thru 396. Check this
bolt kit to be sure the following
parts are included:
Quan.
Description
1
1-3/4" Round Cap Plug
8
5/16" Lock Washer
14
5/16" Flat Washer
4
5/16-18 Blind Fastener
1
Installation Tool
1
5/16-18 x 2-1/4" Bolt,
black oxide
4
5/16-18 x 1-1/4" Hex Bolt
4
5/16-18 x 1" Hex Bolt
12
5/16-18 Nylon Lock Nut
4
"J" Bolt
4
Plastic Retaining Washer
4
Fender Washer
DANGER
Danger of explosion. Do not use this product for storing or trans-
porting flammables, explosives, hazardous materials, or hazardous
waste, such as containers of gasoline, solvents, gun powder,
dynamite, propane tanks, acetylene tanks, cutting torches and gas
powered equipment. This product is only intended and safe for use
in storing and transporting small tools, equipment and other similar
materials. Any modifications made to, or unintended use of this
product, could create a hazardous condition that can cause death,
serious personal injury or property damage.
INSTALLATION INSTRUCTIONS
Aluminum Hi-Side/Super Side Boxes - Models 346 through 396
TOOLS REQUIRED
1/2" Open or Box End Wrench (2)
Electric Drill
1/2" & 3/8" Drill Bits
Carpenters Square
Utitlity Knife or Scissors
Tape
9/16" Open or Box End Wrench
WARNING
This product can reduce the driver's ability to clearly see road-
ways, vehicular or pedestrian traffic and other objects through the
rear and side windows of the vehicle, which may cause an acci-
dent. Extra precautions should be taken when driving a vehicle
with this product. Make all adjustments necessary to ensure max-
imum visibility, including but not limited to, changing mirror and
seating positions. State and local laws may prohibit obstruction
of windows in a moving vehicle.
Rev. G 2/01 Part No. 24-0033
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
PARTS LIST
1 - Hi-Side (or Super Hi-Side) Box
2 - Legs
2 - Mounting Pads
(20" and/or 27" and/or 45")
Approximate Installation Time:
42 min. per unit (0.7 hrs.)
depending on Truck equipment
installation experience.