WEATHER GUARD 1450 - Manual

(9) 5/16 - 18 Blind
Fastener
(1) 5/16 - 18 x 2-1/4"
Bolt, Black Oxide
(9) 5/16 - 18 x 1-1/4"
Hex Bolt
(9) 5/16" Lock Washer
(3) 3/8 – 16 x 3/4" Thread Cut
Bolt
(1) Blind Fastener
Installation Tool
(4) #10 – 24 x 2-3/4"
Machine Screw
(1) Ladder Stop
(2) Ladder Strap
(1) Tube of Silicone
Sealant
(1) 3/8 - 16 x 3-1/4" Carriage
Bolt
(1) 3/8 - 16 Nylon
Lock Nut
(1) 3/8" Flat Washer
(15) 5/16” Flat Washer
(1) Front Leg Socket
(1) Rear Leg Socket
(1) Front Mounting
Bracket
(1) Rear Mounting
Bracket
(2) Upright
(2) Extension
(1) F-150 Adapter
(4) #10 – 24 Nylon
Lock Nut
(4) #10 Flat Washer
(2) Plastic Rope Cleat
(2) 3/8 – 16 x 1" Thread Cut
Bolt
(1) Floor Mounting
Spacer
(2) 3/8 - 16 Nylon
Lock Nut
(2) 5/16 - 18 x 1"
Hex Bolt
• Electric Drill with 1/2” Chuck
• 1/2” and 7/32” Drill Bits
• 1/2” Open or Box End Wrench
• 9/16” Open or Box End Wrench
• 3/8” Open or Box End Wrench
• Screwdriver - Flat Head
• Framing Square
• Level
• Center Punch
• Hack Saw
• Tape Measure
OPERATORS MANUAL
WEEKENDER® STEEL LADDER RACK
MODELS 1450 & 1475
Approximate installation time: 60 minutes (depending on truck equipment installation experience and/or DIY level)
INSTALLATION TIME
TOOLS REQUIRED
PARTS LIST
WWW.WEATHERGUARD.COM
Frt LegSocket.eps
Rear LegSocket.eps
Frt MountingBrkt.eps
Rear&AngleMounting Brkt.eps
Reduced 80% (not lines)
Upright.eps
Uprights.eps
1450 1475
OR
Extension.eps
Ford F-150Adaptor.eps
3/8-16 x 3-3/4" Carriage Bolt
3/8" Flat Washer
#10 Flat Washer
5/16" Flat Washer
3/8" Flat Washer
#10 Flat Washer
5/16" Flat Washer
5/16” x 2 1⁄4” Bolt.eps
5/16” x 1 1/4” Bolt.eps
#10-24 x 2 3/4" Machine Screw
3/8" Flat Washer
#10 Flat Washer
5/16" Flat Washer
5/16” x 1 1/4” Bolt.eps
ThreadCutBolt,3/4".eps
1” Bolt.eps
1475 Shown
Part No. 24-0192 REV. C ECN 5315 05/13 1