Pilz PNOZ s7.1 C 24VDC 3 n/o 1 n/c cascade - Manual (Page 11)

PNOZ s7.1
Operating Manual PNOZ s7.1
21865-EN-08
11
Relay outputs 750167 751167
Contact fuse protection, external
safety contacts
In accordance with the standard EN 60947-5-1 EN 60947-5-1
Blow-out fuse, quick 10 A 10 A
Blow-out fuse, slow 6 A 6 A
Circuit breaker, 24V AC/DC,
characteristic B/C
6 A 6 A
Contact material AgCuNi + 0,2 µm Au AgCuNi + 0,2 µm Au
Conventional thermal current
while loading several contacts
750167 751167
Ith per contact at UB DC
Conv. therm. current with 1 con-
tact
6,00 A 6,00 A
Conv. therm. current with 2 con-
tacts
5,50 A 5,50 A
Conv. therm. current with 3 con-
tacts
4,50 A 4,50 A
Times 750167 751167
Switch-on delay
With automatic reset after power
on typ.
30 ms 30 ms
With automatic reset after power
on max.
50 ms 50 ms
Delay-on de-energisation
With E-STOP typ. 18 ms 18 ms
With E-STOP max. 30 ms 30 ms
With power failure typ. 18 ms 18 ms
With power failure max. 30 ms 30 ms
Supply interruption before de-ener-
gisation
5 ms 5 ms
Environmental data 750167 751167
Climatic suitability EN 60068-2-78 EN 60068-2-78
Ambient temperature
Temperature range -10 - 55 °C -10 - 55 °C
Storage temperature
Temperature range -40 - 85 °C -40 - 85 °C
EMC EN 60947-5-1, EN 61000-6-2, EN
61000-6-4
EN 60947-5-1, EN 61000-6-2, EN
61000-6-4
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10,0 - 55,0 Hz 10,0 - 55,0 Hz
Max. amplitude 0,35 mm 0,35 mm
Airgap creepage
In accordance with the standard EN 60947-1 EN 60947-1
Overvoltage category III III
Pollution degree 2 2
Rated insulation voltage 250 V 250 V
Rated impulse withstand voltage 6,00 kV 6,00 kV