Hit Products LogicPLUS S 42/128 - Manual (Page 17)

17
LogicPLUS-S Two-Wire Controller 17
Position 6 | | Calendar | | Function Button Odd-Even
The calendar is the third leg of the diamond Setting. After programming the run times and the start
times, the calendar will automatically establish the minimum calendar period. You can manually change
the calendar to any desired period, longer than the minimum “Auto-calendar” period, but not shorter. By
pressing set 1 to select the program, press set 2 to change the number of days desired in the calendar,
(if the total run time exceeds one day, the calendar can not be set backwards.) Press set 3 to review
the days of the calendar. By pressing set 3 repetitively, the display above set 4 will show one of the fol-
lowing events: STRT (start), RUN or OFF for each day of the calendar.
To review the numbered day of the calendar the controller is currently on, use set 1 to choose the pro-
gram desired. The day of the calendar will be displayed directly right of the word “DAY” in the upper
display. You can change the day of the calendar by using set 3 buttons. This will or can bring all days
of all programs to the same day for calendar purposes.
Position 6