Hit Products LogicPLUS S 42/128 - Manual (Page 14)

LogicPLUS-S Two-Wire Controller
14
14
Position 3 | | Pause | |
Pause: Use set 1 to choose the program, use set 2 or 3 to set desired pause time, use set 4 to turn
master valve or pump start function ON or OFF during pause function.
definitions:
Pause: Amount of time delay between sequential valve openings in a program.
Master: Master ON will keep the master valve or pump relay ON during pause.
Master OFF: Will turn master valve or pump relay OFF during pause.
note: in order for the master valve to function, the master valve must be activated
(See position 8 page 21) for that specific program.
Position 3