Bradford White EF-100T-399-3X User Manual

Page 23

Accessing Service Mode on Control Display

For models with Honeywell Integrated Control

7. Software Version (Display only)

8. Error Code History (Displays if there are present error codes or up to 10 previous error codes). Water Heater

Display will show a “--“ if there are no error codes.

SELECT

SET

Status

idle

Operational

To change the Maximum Setpoint Limit (Max Setpoint) for the temperature setpoint:

Step 1: In service mode press the “Select” button until “Max Setpoint” is displayed.

WARNING

Setting the water temperature

to the maximum set point can

result in scalding hot water

delivered to the faucets. It is

highly recommended that the

maximum setpoint be adjusted

to the lowest temperature

possible for the needs of the

installation. Make sure the

water heater control display is

not in a public area that can

result in the temperature

settings being improperly

adjusted.

SELECT

SET

Status

idle

Operational

Soft

SELECT

SET

Status

°F

idle

Max

Operational

Setpoint

This manual is related to the following products: