Welch Allyn Connex CSK 4.1.X - Installation Guide - Manual (Page 30)

26 Configuration Welch Allyn Connex CSK software
User interface settings
1 Web port The port value that will host the Web interface for Data Catcher.
Note: Any changes to the web port value will force the web-interface portion of Data
Catcher to restart. This means you must close the interface and re-open it to continue
configuration.
2 Interface enabled This option enables or disables the Web interface. If this is enabled, the application can be
configured as normal through the configuration interface. If this is disabled, you will not be
able to access the configuration interface.
Note: The only way the interface can be re-enabled after being disabled is to stop the
application, manually edit the “DataCatcherConfig.xml” file to enable the interface, and
restart the application.
1
2