Welch Allyn Connex CSK 4.1.X - Installation Guide - Manual (Page 13)

2
9
Installation
Spot LXi and VSM 6000 Series
Before you install the Welch Allyn Connex CSK software do the following:
• Verify that the connectivity settings in the device software are properly configured.
For details, see the device’s directions for use.
• When using a client/server configuration, please install the server software on the
database server before installing the clients.
• If using wireless communications, check the device’s settings. Verify that these
settings match the access point settings.
• Verify that you have administrator rights for the PC.
• Close all programs before starting the installation.
• If “Device driver signing” appears, select either “Yes” or “Continue.”
To install the Welch Allyn Connex CSK software
1. Insert the Connex CSK CD. This screen appears:
If this screen does not appear, open Connectivity Install on the CD.