Welch Allyn Modem-Propaq - Quick Reference Guide - Manual (Page 7)

Modem-Propaq Reference Guide 7
English
Note
A modem-linked Propaq CS, Propaq Encore, or Propaq 100 Series monitor transmits a
maximum of three active patient waveforms to Acuity. The monitor transmits waveforms in
the following priority: ECG1, CO2 (or RESP if no CO2), ECG2, SpO2, and RESP. The
monitor transmits numeric information for all active vital signs. Acuity does not display the
manometer bar for the monitor NIBP.
Disclaimers
Protocol Systems, Inc. cautions the reader of this manual:
• Protocol Systems, Inc. will not be responsible for any injury to the user or other
person(s) that may result from accidents during operation of the Modem-Propaq
option.
• Protocol Systems, Inc. assumes no responsibility for usage not in accordance with
this manual that results in illegal or improper use of the Modem-Propaq option.
Before You Connect the Modem-Propaq,You Need:
• Propaq CS, Propaq Encore, or Propaq 100 Series monitor with an ACUITY or
ACUITY-MODEM connector
• Monitor ac power adapter
• Modem with the MODEM-PROPAQ label
(programmed to call the Acuity Central Monitor)
• Modem ac power adapter
• Modem-Propaq Cable
• Telephone cable
• Access to a standard analog telephone outlet (connected to an outside line)
• Modem carrying case (optional)
Modem label