Welch Allyn Modem-Propaq - Quick Reference Guide - Manual (Page 13)

Modem-Propaq Reference Guide 13
English
Move the Patient to Another Location
Note
If a Propaq is not turned off, patient data remains stored in the Propaq monitor. When the
Propaq is reconnected to Acuity, it transfers up to five hours of numerical patient data to
Acuity.
Note
The modem is programmed to dial the Acuity telephone number when the Modem-Propaq
Cable is plugged into the Propaq. If you move the patient, consider whether you need to have
the modem programmed for a different phone number (for example, to add an area code for
a long-distance call). If modem reprogramming is needed, contact your Biomedical
Engineering department.
At the Propaq
1. From the Main Menu, press:
• Propaq CS NET OFF
• Propaq Encore SETUP , ACUITY , NET OFF
• Propaq 100 Series SYSTEM , NET OFF
2. Within a few seconds, disconnect the Modem-Propaq Cable from the Propaq
ACUITY-MODEM connector.
3. Turn off the modem and disconnect the modem ac power adapter from the
electrical outlet.
4. Disconnect the modem telephone cable from the telephone outlet.
5. Leave the Propaq turned on. Disconnect the monitor ac adapter (if connected).