Welch Allyn Modem-Propaq - Quick Reference Guide - Manual (Page 11)

Modem-Propaq Reference Guide 11
English
Temporarily Disconnect the Patient from Propaq,
Then Reconnect
1. Disconnect all Propaq sensor cables from the patient.
2. At the Propaq, press keys to acknowledge and disable all Equipment Alerts.
3. Keep the Propaq turned on to save the patient’s trend information and alarm
limit settings.
Reconnect the Patient to the Propaq
1. Reconnect the Propaq sensor cables to the patient.
2. If the Propaq displays CONFIRM PATIENT?, press YES .