Welch Allyn Modem-Propaq - Quick Reference Guide - Manual (Page 6)

6 Protocol Systems, Inc.
General Warnings and Notes
Warning
Use of equipment, accessories, and parts not recommended or supplied by Protocol
Systems, Inc. could result in inaccurate patient information, or could cause damage
to the Propaq monitor and accessories.
Warning
When considering a treatment protocol that involves telecommunication of patient
data, be sure to recognize some possible limitations. Successful telecommunication
requires access to public or private telephone services that may not always be
available or reliable. Be sure to plan for possible limitations or interruptions in patient
monitoring.
Warning
Before connecting a modem-linked Propaq CS, Propaq Encore, or 100 Series monitor
to a telephone line, make sure the telephone line is not equipped with any central
system features such as Call Waiting or Call Forwarding. Also make sure that other
telecommunication devices do not have access to the line, such as other telephones,
modems, fax machines, or automatic burglar alarms. These features and devices can
disrupt modem operation and interrupt or prevent patient monitoring.
Warning
When outside interference causes a modem-linked Propaq CS, Propaq Encore, or
Propaq 100 Series monitor to disconnect from Acuity and display the message
EQUIPMENT ALERT, NETWORK FAULT, patient monitoring is interrupted. (Acuity
displays the message LOSS OF COMMS.) A Propaq CS or Propaq Encore
automatically redials and attempts to reconnect. However, a Propaq 100 Series
monitor may not redial until you turn the modem power off and on, or unplug and plug
the Modem-Propaq cable into the monitor. Contact a Protocol Systems representative
for more information about modem selection and use.