Welch Allyn Modem-Propaq - Quick Reference Guide - Manual (Page 12)

12 Protocol Systems, Inc.
Temporarily Disconnect the Propaq from Acuity,
Then Reconnect
1. From the Propaq Main Menu, press:
• Propaq CS NET OFF
• Propaq Encore SETUP , ACUITY , NET OFF
• Propaq 100 Series SYSTEM , NET OFF
2. Within a few seconds, disconnect the Modem-Propaq Cable from the Propaq
ACUITY-MODEM connector.
3. Keep the Propaq turned on to save the patient’s trend information and alarm
limit settings.
Reconnect Propaq to Acuity
1. Plug the Modem-Propaq Cable into the Propaq ACUITY-MODEM connector.
Within a few seconds, the modem will automatically dial the Acuity telephone
number. Depending on the phone line quality, the connection may require a
few minutes.
2. When the Propaq displays CONFIRM PATIENT?, press YES .