Welch Allyn AcuityLink Clinician Notifier - User Manual - Manual (Page 49)

Directions for Use Respond to alarms and alerts 45
Respond to equipment alerts
Under the following circumstances, your mobile device displays Clinician Notifier
equipment alert popup windows.
Disconnection alerts
Network Disconnected Alert
The Network Disconnected popup window occurs if your mobile device is not
communicating with the Welch Allyn Connectivity Server (WACS).
The popup window is always associated with a “chirp” tone. The chirp repeats every 20
seconds.
appears in the bottom right corner of your mobile device screen.
To respond to a Network Disconnected popup window
1. Tap OK.
2. Walk within the usual area of clinical operation.
The message and tone remain until the communication problem is resolved.
If you think that you are within range and the message remains, contact your system
administrator.
3. If the Log In page appears, re-log in using the same user name and password that you
used before the disconnection.
Your patients remain assigned if you have been logged out for less than two hours.