Welch Allyn AcuityLink Clinician Notifier - User Manual - Manual (Page 18)

14 Get started Welch Allyn AcuityLink Clinician Notifier
Log in to the Clinician Notifier program
Always log in to the Clinician Notifier program each time you accept a mobile device. This
ensures that alarms can be delivered to the device, and that the device and patients are
assigned to you.
The system allows you to be logged in to the Clinician Notifier program on only one
mobile device at one time. If there is a conflict, the system notifies you when you attempt
to log in.
To verify that the prior clinician logged out
1. If you receive a mobile device displaying a Clinician Notifier page that differs from one
of the above pages, you must log out of the program:
a. Tap .
A confirmation popup window appears.
b. Tap Yes.
You are logged out of the Clinician Notifier program.
To log in to the Clinician Notifier program
1. Verify that the AcuityLink Clinician Notifier page lists your current unit.
If the device is not registered to your current unit, contact your system administrator.
Patients listed on a device correspond with the unit registration of the device.
2. Tap Log In.
The Login page appears.
3. Tap in the user name given to you by your system administrator.
4. If you see a Password field, tap in your password.
5. Tap Submit.
You are sent to the Home page or the Assign Patients page, depending upon your unit
configuration.
You are now logged in, and you can receive patient alarms.
AcuityLink Clinician Notifier page Login page