Welch Allyn AcuityLink Clinician Notifier - User Manual - Manual (Page 32)

28 View patient information Welch Allyn AcuityLink Clinician Notifier
View a realtime waveform
The Realtime page displays the realtime waveforms and vital-sign numerics of patients
connected to the Acuity System.
All of a patient’s waveforms that are shown at the Acuity Central Station display are
available in this page.
To navigate to the Realtime page
1. From the bottom of any page, tap .
The Patient List page appears.
2. Tap a patient name.
3. Tap Realtime.
The Realtime page appears.
If Realtime is grayed out, the patient is not connected to the Acuity System.
To adjust the realtime display
1. Adjust the display.
• To change the lead source or vital-sign source of the waveform: Tap the pulldown
menu, and then tap your selection.
• To scroll to additional vital-sign numeric values: Tap in the numerics area above
the top waveform.
• To change the waveform amplitude: Tap anywhere in the grid.
• To change the waveform sweep speed: Tap mm/sec.
Pulldown menu:
HR: Heart rate
SpO2: Blood oxygen saturation
BR: Breath rate from CO2 source
RR or RESP: Respiration rate form ECG source
CO2 M: Mainstream CO2
CO2 S: Sidestream CO2
IPI: Integrated Pulmonary Index
T1: Temperature 1
T2: Temperature 2
TD: D between T1 and T2
INVP1 or IBP1 or P1: Invasive pressure 1
INVP2 or IBP2 or P2: Invasive pressure 2
INVP3 or IBP3 or P3: Invasive pressure 3
INVP4 or IBP4 or P4: Invasive pressure 4