Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 107)

99
Firmware Upgrade
4-Port SSL/IPSec VPN Router
Appendix O
Appendix O:
Firmware Upgrade
Overview
This appendix explains how to upgrade the firmware of
the Router.
Before You Begin
If you are using Internet Explorer on Windows XP, disable
the pop-up blocking function before you upgrade the
Router’s firmware. (This avoids a firmware upgrade
failure.)
NOTE: Internet Explorer on Windows 2000 and
other operating systems do not have this issue.
Internet Explorer 6.0 or Higher
Open Internet Explorer.
Click Tools.
Click Internet Options.
Internet Explorer > Tools
Click the Privacy tab.
Internet Explorer > Tools > Tools
1.
2.
3.
4.
Deselect (remove the checkmark from) Block
pop-ups.
Internet Explorer > Tools > Internet Options > Privacy
Click OK.
How to Access the Web-Based Utility
For local access of the Router’s web-based utility,
launch your web browser, and enter the Router’s
default IP address, 9.8.., in the Address field.
Press the Enter key.
Address Bar
A login screen prompts you for your User Name and
Password. Enter admin in the User Name field, and
enter admin in the Password field. (You can change
the Password on the Setup > Password screen.) Then
click Login.
Login Screen
5.
6.
1.
2.