Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 103)

9
Multiple VLANs with Computers
4-Port SSL/IPSec VPN Router
Appendix L
Select Enable VLAN.
Enter in the VLAN ID field.
To create VLAN2, click Add VLAN.
Enter in the VLAN ID field.
To create VLAN3, click Add VLAN.
Enter 4 in the VLAN ID field.
To create VLAN4, click Add VLAN.
Click the Port Setting tab.
Port Management > Port Setting
For Port ID 4, select Trunk as the Mode.
Click Save Settings.
Click the VLAN Membership tab.
Port Management > VLAN Membership
Select from the VLAN ID drop-down menu.
Enter a description in the Description field.
Select Tagged in the Port 4 column.
Select from the VLAN ID drop-down menu.
Enter a description in the Description field.
Select Tagged in the Port 4 column.
Select 4 from the VLAN ID drop-down menu.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Enter a description in the Description field.
Select Tagged in the Port 4 column.
Click Save Settings.
NOTE: All VLANs will be part of the default
subnet of the Router. If you want to use multiple
subnets with your VLANs, refer to “Appendix M:
Multiple VLANs and Subnets”.
SRW2048 Configuration
To configure VLANs 2, 3, and 4, refer to the documentation
for the SRW2048.
23.
24.
25.