Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 101)

9
Configuration of Multiple Subnets
4-Port SSL/IPSec VPN Router
Appendix K
Enter 9.8.. in the Default Gateway field.
Enter in the Hop Count field.
Select WAN from the Interface drop-down menu.
To create the static route, click Add to list.
Click Save Settings.
Click the Firewall tab.
For the Firewall setting, select Disable.
Click Save Settings.
RV042 #2 Configuration
Launch the web browser for a computer connected
one of the Ethernet ports of the RV042 #2.
Access the web-based utility of the RV042 #2. (Refer to
the User Guide of the RV042 for details.)
Click the Setup tab.
Click the More tab.
Click the Advanced Routing tab.
For the Working Mode setting, select Router.
In the Static Routing section, enter 9.8.0.0 in
the Destination IP field.
Enter ...0 in the Subnet Mask field.
Enter 9.8..0 in the Default Gateway field.
Enter in the Hop Count field.
Select WAN from the Interface drop-down menu.
To create the static route, click Add to list.
Click Save Settings.
Click the Firewall tab.
For the Firewall setting, select Disable.
Click Save Settings.
9.
10.
11.
12.
13.
14.
15.
16.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.