Torbal printer configuration (rxp-4), Chapter 15 – Torbal AGCN200 User Manual
Page 42
Instruction Manual - TORBAL AGCN Series
Chapter 15.
PRINTING AND RS232 COMMUNICATION PORT CONFIGURATION
After a weighing transaction is completed, a result data receipt can be printed. To initiate printing, wait for the
weighing result to stabilize and press the P key.
15.1.1.Torbal Printer Configuration (RXP-4)
The printing function is used to print data via the RS232 port. Data may be printed via the printer or sent to a PC via
the Torbal Communication Software.
To connect the AGCN Scale to a Torbal (RXP-4) printer, use the following settings:
Scale settings:
Baud rate: 9600
Parity: none
Data bits: 8
Printer settings (follow the steps detailed in the RXP-4 instruction manual):
Baud rate: 9600
Data: 8 bits
Parity: none/ignore
Column printing: 40
RS232 Communication Port Configuration
42