Automatic zero setting mechanism (azsm), Azsm – enable / disable, Chapter 9.automatic zero setting mechanism (azsm) – Torbal AGCN200 User Manual
Page 18: Chapter 9
Instruction Manual - TORBAL AGCN Series
3. Press the T key again when command “CAL PRN” is displayed.
4. Command “PRINT” will be displayed indicating that data has been sent to an external printer or a PC via the
RS232 communication port. For more on printing set-up and configuration, please turn to chapter
xx.
Chapter 9.
AUTOMATIC ZERO SETTING MECHANISM (AZSM)
All AGCN scales are equipped with AZSM, the “Auto Zero Setting Mechanism.” AZSM automatically
maintains a “center of zero” condition within +/- 2d.
9.1.1.1.AZSM – Enable / Disable
To enable or disable AZSM, follow these steps:
1. Enter the main menu by pressing the MENU key.
18
This manual is related to the following products: