Torbal AGCN200 - Manual (Page 12)

Instruction Manual - TORBAL AGCN Series
Chapter 8.
CALIBRATION
When the scale is initially installed, it will automatically calibrate at start up to ensure the accuracy of
weighing results. You can also configure the scale to calibrate automatically with time and temperature variations.
8.1.1.Initializing Automatic Calibration
To calibrate the scale at any time, follow these steps:
1. Press the calibration key located on the scales front panel.
2. Command “PRESS AGAIN” will be displayed sequentially for approximately 5 seconds.
3. While the command “PRESS AGAIN” is displayed, press the calibration key once more.
12