Torbal AGCN200 - Manual (Page 37)

Instruction Manual - TORBAL AGCN Series
8. Once the temperature has been entered and accepted, command “PRESS TARE” will be displayed indicating
to tare the scale.
9. Once the scale has been tared, place the solid object on the upper pan of the density kit to perform a weighing
in the air.
10. Once the weight of the object stabilizes, press the P key. Command “M1” will be displayed indicating that the
weight of the object in air has been stored in the formula.
11. Remove the object from the upper pan of the density kit and place it on the lower pan of the density kit to
perform a weighing in liquid.
37