Torbal AGCN200 - Manual (Page 13)

Instruction Manual - TORBAL AGCN Series
4. The scale will display “WAIT”, indicating that automatic calibration has begun.
5. Calibration can last from 30 to 50 seconds. When it is finished, the scale will automatically return to the
weighing mode.
8.1.2.Calibration Adjustment
The calibration adjustment function allows the internal calibration mass value to be adjusted with an external
calibration weight that has a traceable class certification. To perform calibration adjustment, follow these steps:
1. Enter the main menu by pressing the MENU key.
2. Enter the calibration set up by pressing the T Key when “CALIBR” is displayed.
3. Press the T Key again when “CAL ON” is displayed.
13