Torbal AGCN200 User Manual

Page 19

Instruction Manual - TORBAL AGCN Series

2. When command “AUTOTAR” is displayed, press the T key.

3. Commands “AUT ON”,” AUT OFF”, and “AUT SET” will be displayed sequentially.

4. To enable AZSM, press the T key when AUT ON is displayed.

5. To disable AZSM, press the T key when AUT OFF is displayed.

Note: AZSM is automatically enabled for 10 minutes after the scale is turned ON, regardless of its ON/OFF
configuration.

This manual is related to the following products: