ThingMagic Mercury xPRESS Platform v1.7 - Manual (Page 59)

WiFi Module
A D I V I S I O N O F T R I M B L E
Using the Optional Modules 59
Known Limitations
1. Currently, the default interface depends on the slot in which the module is installed
and is either USART1 (slot 0) or USART2 (slot 1)

WIFLY_DEVNAME is set to use USART1 or USART2
 Disable other interfaces in code if using same USART
2. Currently baud rate works up to 230400 and by default it is configured as 230400
Known Issues
1. WiFly module wakeup from its sleep is not as per configuration setting
(WIFLY_TCP_WAKE_TIMER)
WiFly module goes to sleep mode depending on values defined for
WIFLY_TCP_IDLE_TIMER and WIFLY_TCP_SLEEP_TIMER, but the module wakes
up immediately instead of staying in sleep mode for the time in msec defined by
WIFLY_TCP_WAKE_TIMER
set ftp pass WIFLY_FTP_SERVER_PASSWORD
set ftp dir WIFLY_FTP_SERVER_DIR
FTP - Connect to an FTP Server
set ftp dir WIFLY_FTP_SERVER_DIR
set ftp user WIFLY_FTP_SERVER_USER
set ftp pass WIFLY_FTP_SERVER_PASSWORD
Other Commands
set sys autosleep
WIFLY_TCP_SLEEP_TIMER