ThingMagic Mercury xPRESS Platform v1.7 - Manual (Page 32)

xPRESS Console
A D I V I S I O N O F T R I M B L E
32 Using the Sample Application

run-time-stats
Displays a table showing how much processing time each FreeRTOS task has used

echo-3-parameters
Expects three parameters, echos each in turn

echo-parameters <...>
Take variable number of parameters, echos each in turn

param-test
Parameter-parsing demo. Enter any number of unsigned integer arguments

var-params : Parse arbitrarily long list of params

spi-test: Run canned SPI test

twi-probe [start] [end]
Find all connected TWI/I2C devices in the 8-bit address range [start,end]
(default=[0,0x80])
Note
I2C protocol analyzers see 0x78-0x7B as "unknown" 10-bit addresses, since
they start with the 10-bit address preamble (11110)

twi-read : Read TWI/I2C EEPROM

twi-write : Write TWI/I2C EEPROM

wiznet-spitest: Run SPI transfer rate test in POE module’s WIZnet W5500-
compatible mode

wiznet-dhcp: Run DHCP for POE module’s WIZnet W5500

wiznet-test: Run canned POE modules’s WIZnet W5500 test

wifly-get-net-info: Display the WiFi module network details

wifly-get-mac: Display the WiFi module MAC address

wifly-factory-reset: Reset the WiFi module’s configuration settings to the factory
defaults

wifly-firmware-update: WiFi module firmware update via FTP

rtc-datetime: /
To get/set Real-Time-Clock date and time