ThingMagic Mercury xPRESS Platform v1.7 - Manual (Page 103)

A D I V I S I O N O F T R I M B L E
Using the Developer Toolkit 103
Right-click on the problem(s) and select Delete.
If the problem(s) come back on the next build, investigate further.
If it is impossible to resolve the Codan errors, and you are sure that the
build succeeded, you can skip the popup by checking Always launch
without asking before clicking Proceed
To change back, go to menu Window / Preferences
Navigate to Run/Debug / Launching
Set Continue launch if project contains errors
Disconnecting the Console
Once the Demo App is running satisfactorily on the xPress platform, press the
“Terminate” button on the Eclipse screen.
It is now safe to disconnect the debugger from the xPRESS motherboard. (It is best
to disconnect the USB interface first)
Remove power from the xPRESS motherboard and disconnect the USB cable. Re-
connect power and re-connect the USB cable. The PC will detect the xPRESS
platform as a keyboard. Once that association is complete, pressing the “User
Switch” will read tags, pressing it again will cease reading.