ThingMagic Mercury xPRESS Platform v1.7 - Manual (Page 14)

A D I V I S I O N O F T R I M B L E
14 Regulatory and Safety Compliance
applied for, with “CB” test results included in the paperwork that is submitted for
approval).
Authorized Antennas
FCC and IC modular certification requires that the vendor submit a list of antennas which
have been tested for compliance with the module. Antennas of the same type as a
compliant antenna, but having lower gain, are permitted to be used in place of approved
antennas. The following table provides information about the antennas that ThingMagic
has successfully submitted for approval when modular certification was obtained.
Micro and Micro-LTE
*For circularly polarized antennas, the maximum linear gain is the maximum gain as
measured with a calibrated linear dipole antenna, facing the C.P. antenna at any
rotational angle. The published circular polarized gain can be as much as 3 dB higher
than the maximum linear gain.
Vendor Model Type Polarization
Maximum
Linear Gain
(dBi)*
ThingMagic
(Laird) ANT-NA-9025
(S9025P)
Patch Circular 4.3
ThingMagic
(Laird) ANT-NA-A5
(S8658WPL)
Patch Circular 6.0
ThingMagic (MTI
WIreless) ANT-NB-7-2031
(MT-262031)
Patch Circular 6.0
ThingMagic (MTI
Wireless) ANT-WB-12-
2043 (MT-
242043)
Patch Circular 6.0
ThingMagic (MTI
Wireless) ANT-WB-6-2025
(MT-242025)
Patch Circular 6.0
Laird FG9026 Dipole Linear 6.0