SINGER XL-580 - Manual (Page 26)

24
1. LCD DISPLAY
When turning on the machine without the embroidery
unit attached, straight stitch number 00, is selected. The
information on the display changes for regular sewing,
programming and embroidering. For regular sewing, the LCD
display shows the number of the selected stitch, an image of
the stitch, and stitch width and stitch length settings.
See page 26 - 27 for information about the display when
creating a stitch program, and page 102 - 103 for information
about the display when embroidering.
2. DIRECT SELECTION BUTTONS
Frequently used stitches are available by the direct selection
buttons. Simply press a button to select that stitch.
3. PROGRAM MODE BUTTON
Press this button to enter Program Mode. Read more about
programming under 4 and 5 below.
1
2
CONTROL PANEL FUNCTIONS
3
4
5
6
7
8