SINGER XL-580 - Manual (Page 108)

106
Down
Haut
Abajo
Feed dog control
Abaisse-griffe d’entraînement
Control de dientes
PRESSER FOOT LIFTER
There are three positions for your presser foot.
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert or remove fabric.
3. Lift it to its highest position to change the presser foot or to
remove thick fabric.
FEED DOG CONTROL
The feed dogs control the movement of the fabric that is
being sewn. They should be raised for all general sewing
purposes and lowered for darning, freehand embroidery and
monogramming so that you, not the feed dogs, are moving the
fabric.
4. OTHER THINGS YOU SHOULD KNOW
CONVERTING TO FREE-ARM SEWING
arm model.
With the extension table in position, it provides a large working
VXUIDFHDVDVWDQGDUGÀDWEHGPRGHO
7RUHPRYHWKHH[WHQVLRQWDEOHKROGLW¿UPO\ZLWKERWKKDQGV
and pull it off to the left as shown. To replace, slide the
extension table back into place until it clicks.
With the extension table removed the machine converts into a
slim free-arm model for children’s clothes, cuffs, trouser legs,
and other hard-to-reach places.