Rice Lake TA Series, Rice Lake Weighing Systems User Manual
Rice lake ta series, Operation manual
Table of contents
Document Outline
- PREFACE
- Contents
- 1 Precautions Relating to Use
- 2 Names of Component Parts
- 3 Installation of the Balance
- 4 Basic Operation
- 5 Function 1
- 6 Function 2
- 7 Weighing and Measurement Modes
- 8 Parts Counting
- 9 Percentage Weighing
- 10 Unit Converting
- 11 Gravimeter
- 11.1 Measurement procedures for specific gravity
- 1. Preparation for specific gravity measurements.
- 2. Measure the water temperature in the container and enter the value into the balance.
- 3. Reset the display to “0”.
- 4. Measure the weight of the sample in the air.
- 5. Submerge only the hanging cage and set to “0”.
- 6. Measure the weight of the sample in water.
- 7. Displaying specific gravity
- 8. Return to weight display.
- 11.2 Entering water temperature or the specific gravity of the media
- 11.3 Gravimeter measurement data output
- 11.1 Measurement procedures for specific gravity
- 12 Addition Function
- 13 Limit Function
- 13.1 Setting the Limit Function
- 13.2 Judgment and Saving
- 13.3 Display of Judgment Results
- 13.4 Judge by Absolute Values
- 13.5 Judge by Deviation Values
- 13.6 Bar Graph for the 2-point Scale
- 14 Calibration and Span Test for the Balance
- 14.1 Span Adjustment with Built-In Weights
- 14.2 Span Adjustment with External Weight
- 14.3 Span Test with Built-In Weights
- 14.4 Span Test with External Weight
- 14.5 Calibration of Built-In Weights
- 14.6 Entry of Weight Error
- 14.7 Advice CAL and Full-automatic Span Adjustment
- 14.8 Auto Repeatability Measurement (ARM)
- 15 Date and Time Setup
- 16 Various Functions
- 17 Input/Output Functions
- PC9801
- 18 Use Printers
- 19 Output in Compliance with ISO/GLP/GMP
- 20 Removing the Windshield Door
- 21 Operate on Batteries
- 22 Troubleshooting
- 23 Specifications
- 24 Unit Conversion Table
- TA Series Limited Warranty