Rice Lake TA Series, Rice Lake Weighing Systems Instruction Manuals and User Guides

We have 1 Instruction Manual and User Guide for TA Series, Rice Lake Weighing Systems Rice Lake

Rice Lake TA Series, Rice Lake Weighing Systems User Manual, 88 pages

Recognized languages:	English
Pages:	88
Size:	4.08 MB

Show table of contents

Document Outline

PREFACE
Contents
1 Precautions Relating to Use
2 Names of Component Parts
- 2.1 Main Unit
- 2.2 Operation Keys
- 2.3 Displayed Signs
  - 2.3.1 Displayed signs
3 Installation of the Balance
- 1. Attach the pan base and pan.
- 2. Level the Balance.
- 3. Connect the AC adapter.
4 Basic Operation
- 4.1 Power On/Off
- 4.2 Weighing
- 4.3 Zero Adjustment
- 4.4 Tare (pan)
- 4.5 Set a Gross Weight
- 4.6 Single-touch Response Setting
- 4.7 Data Output
- 4.8 Hanging Measurement
5 Function 1
- 5.1 Setting and Check
- 5.2 Description of Function 1
- 5.3 Specific Gravity Setting
- 5.4 Limit/Addition Functions
- 5.5 Interface
6 Function 2
- 6.1 Calling and Setting
- 6.2 Description of Function 2
7 Weighing and Measurement Modes
- 7.1 Weighing and Measurement Modes
- 7.2 Weighing Machine
8 Parts Counting
- 1. Start sampling.
- 2. Change the number of samples as required.
- 3. Put a sample on the balance.
- 4. Put additional samples on the balance.
- 5. Finish sampling.
- 6. Counting the number of samples.
9 Percentage Weighing
- 9.1 Set a reference weight by weighing an actual sample
- 9.2 Set a reference weight by entering a value
10 Unit Converting
- 1. Displaying the coefficient setting.
- 2. Enter a coefficient.
- 3. Changing numbers.
- 4. Select digit places to specify a coefficient.
- 5. Save the coefficient.
- 6. Put a sample to weigh on the balance.
11 Gravimeter
- 11.1 Measurement procedures for specific gravity
- 11.2 Entering water temperature or the specific gravity of the media
- 11.3 Gravimeter measurement data output
12 Addition Function
- 12.1 Cumulate Function
- 12.2 Net Addition Function
13 Limit Function
- 13.1 Setting the Limit Function
- 13.2 Judgment and Saving
- 13.3 Display of Judgment Results
- 13.4 Judge by Absolute Values
  - 13.4.1 Set two limit values by putting actual samples on the balance ( Judge by Absolute Values (
  - 13.4.2 Set two limit values by entering values
- 13.5 Judge by Deviation Values
  - 13.5.1 Set two limit values by putting actual samples on the balance ( Judge by Deviation Values (
  - 13.5.2 Set two limit values by entering values ( Judge by Deviation Values (
- 13.6 Bar Graph for the 2-point Scale
14 Calibration and Span Test for the Balance
- 14.1 Span Adjustment with Built-In Weights
  - 1. Press the Cal key.
  - 2. When [PuSH C] is displayed, press the Cal key again.
- 14.2 Span Adjustment with External Weight
- 14.3 Span Test with Built-In Weights
  - 1. Press the Cal key.
  - 2. When [PuSH C] is displayed, press the Cal key again.
- 14.4 Span Test with External Weight
- 14.5 Calibration of Built-In Weights
- 14.6 Entry of Weight Error
- 14.7 Advice CAL and Full-automatic Span Adjustment
- 14.8 Auto Repeatability Measurement (ARM)
15 Date and Time Setup
- 15.1 Time Setup
- 15.2 Date Setup
16 Various Functions
- 16.1 Auto-Zero (Zero Tracking)
- 16.2 Auto Backlight OFF
- 16.3 Auto Power Off
- 16.4 Set Unit
- 16.5 Minimum Readability Setting
- 16.6 Date Display
- 16.7 Time Stamp Output
- 16.8 Save Tare Weight Function
- 16.9 Direct Start
- 16.10 Interval Output Function
- 16.11 Input of ID No.
17 Input/Output Functions
- 17.1 RS232C Output
- 17.2 Type of Communication Texts
- 17.3 Output Data
- 17.4 Input Commands
- 17.5 Special Format Output
  - 17.5.1 Special format 1
  - 17.5.2 Special format 2
PC9801
18 Use Printers
- 18.1 Setting up the Printer
- 18.2 Outputting calibration results
- 18.3 Output of Measurement Data in Compliance with ISO/GLP/GMP
19 Output in Compliance with ISO/GLP/GMP
20 Removing the Windshield Door
- 20.1 Removing the Windshield Door
  - 1. Remove the pan and pan base.
- 20.2 Caring for the balance
21 Operate on Batteries
22 Troubleshooting
23 Specifications
- 23.1 Basic Specifications
- 23.2 Weighing Capacity and Minimum Readability by Unit
24 Unit Conversion Table
TA Series Limited Warranty

Popular Brands

Popular manuals