Rice Lake TA Series, Rice Lake Weighing Systems - Manual (Page 11)

RL-TA Series Operation Manual 7
2.3 Displayed Signs
2.3.1 Displayed signs
Display Description
Displays the judgment results when the (five-point) limit function is enabled.
＊
Displayed when the balance is in standby mode.
Indicates that the addition function is enabled for accepting an additional load.
○
Indication of stable balance (If this light is off, the balance is unstable.)
＋ Sign for sample addition when parts counting is performed
－ Minus
M Display of set values from memory (If it is flashing, the value is being saved.)
→0← Zero-point
Bar graph (Refer to Hints on page 44).
Battery indicator. This is displayed when the balance is powered by
batteries. As the gets weaker, the sign is changed into [
] or [ ].
(Refer to “Section 21: Operate on Batteries” on page 81).
CAL Displayed when calibration and Advice CAL are enabled.
Lights up when date/time is being set or displayed.
Blinks during interval output.
Displayed when data is output in compliance with ISO/GLP/GMP.
B/G Gross weight
Net Tare sign
＃ Unit converting
Σ
Displays a sum total.
Pcs Parts counting
mom Momme
％ Percentage weighing
Displays the selected unit.
mg Milligram, gram
▲, ►
Displayed according to the function.