Rice Lake FC-i/Si Series, A&D Weighing - Manual (Page 59)

Tare Weight
(g)
19
10 digits including sign
and decimal point.
Enter a tare weight in “g” directly.
Similar to “
4-1. Using the
KEYBOARD TARE key”.
‰ If the EAN/JAN/UPC-A is used for ID number, put leading zeros (that are “0” for the
high-order digits) to keep the necessary digit number.
Example of ID number “000123”
EAN/JAN-13 010000000123[3] ([3] shows check digit)
EAN-8 0100123[5] ([5] shows check digit)
UPC-A 01000000123[5] ([5] shows check digit)
When the data from bar code reader is not acceptable, the scale will beep 4 times.
‘The data contains too many digits or too many significant digits.
‘The data contains invalid identification code.
‘The data is out of range. (The tare data is more than the capacity, etc.)
‘The tare or unit weight has a minus sign.
‘The data has start / stop characters or a check digit. These will lead to the
invalid identification code, too many digits and so on.
The check digit may be accepted as a wrong number.
Do not set the bar code reader to send the check digit.
Example: EAN-8 / 0100123[5] ([5] is a check digit) can be accepted as ID number
“001235”.
Examples of Bar Code
ID Number = 123456 Interleaved 2 of 5
ID Number = 123456 EAN/JAN-13
ID Number = 123 EAN/JAN-8
ID Number = 123 UPC-A
Unit weight = 123.456g Code 39
Unit weight = 0.27217 lb Code 39
Tare weight = 1.234 kg Code 39
Tare weight = 0.5 lb Code 39
01123456
0100001234562
01001235
010000001235
*12+123.456*
*13+000.27217*
*15+00001.234*
*16+0.5*