Rice Lake FC-i/Si Series, A&D Weighing - Manual (Page 44)

F-09-X key
‰ Operation mode for th e key
0 Operating as a MODE key to display comparator upper
and lower limits, and time and date.
1 Operating as M- key to subtract Count data from M+
memory.
‰ Decimal Point and Weight Data for RS-232C Output
0
Decimal point="
.
"
Stable weight data format ="ST,+001.23456 kg"
1
Decimal point = “
,
”
Stable weight data format = “ST,+001,2346 kg”
2
Decimal point = “
.
”
Stable weight data format = “WT,+001.2346 kg”
3
Decimal point = “
,
”
Stable weight data format = “WT,+001,2346 kg”
F-10-X External Control Signal Input
‰ Control Signal Input #1 and #2.
Select an input (key function) as listed below for each
Functions
f-10-01 and f-10-02.
Prepare a 3.5mm
stereo jack plug and
connect one or two
switches to this.
0
Reset RESET . (Factory Setting for f-10-01)
1
Enter ENTER . (Factory Setting for f-10-02)
2
Tare TARE .
3
Zero ZERO .
4
Sample SAMPLE .
5
Remote Scale REMOTE SCALE .
6
Total TOTAL .
7
M+ M+ .
8
Standby / Operate STANDBY/OPERATE .
9
Print PRINT .
f-10-01
f-10-02
f-09-01
f-09-02
#1 #2
COMMON
#2 #1