Rice Lake Ohaus Explorer Pro High Capacity Instuction Manual - Manual (Page 43)

Explorer Pro EN-39
Brightness:
Allows adjusting the brightness level of the display.
Audible Signal: On, Off (default is Off)
With audible signal set On, each button press will generate a
tone.
Exit:
When selected, returns to previous screen.
3.5.3 Readout
Press the Menu button, and select Readout.
Press the Enter button. The READOUT screen is displayed.
READOUT
Filter Level : Medium
Stability Level (d) : 1.0
Auto Zero (d) : 0.5
Auto Tare : Off
Legal for Trade : Off
Exit
Filter Level: Low, Medium, High (default is Medium)
Sets the balance reading averaging level to a value of Low,
Medium or High. A higher filter level will provide a more repeatable
measurement.
Stability Level: 0.5, 1.0, etc... (default is 1.0)
Sets the balance stability level for the stability indicator to either
0.5, 1.0, 2.0 or 5.0. A 0.5 setting is equivalent to end result of
.5 display digit. A 5.0 setting is equivalent to end result of 5
display digits.
Auto Zero: Off, 0.5, etc... (default is 0.5)
Sets the balance auto zero level to either Off, 0.5, 1.0, 2.0 or
5.0. Auto Zero tracking compensates for the drift at zero load.
0.5d means 0.5 display digit drift compensation per second.
5.0d means 5 display digit drift compensation per second.
Auto Tare: On, Off (default is Off)
Sets the Auto Tare function to On or Off. This feature provides
auto tare in all application modes. When Auto Tare is On, the
balance waits for the container/load to be placed on the pan
and automatically tares it. This function is repeated for each
new container/load.
Legal for Trade: On, Off (default is Off)
Sets the Legal for Trade (LFT) function either On or Off. Refer to
paragraph paragraph 3.5.12 for additional information.
3.5.4 Application Modes
Press the Menu button, and select Application Modes.
Press the Enter button APPLICATION MODES screen is displayed.
All application modes are displayed on this screen. Each mode
may be set on or off. These modes are cycled through when the
Mode button is pressed.
3.5.5 Units
Press the Menu button, and select Units. The UNITS screen
displays a list of the available weighing units. Depending on
the model, some units are not available.
APPLICATION MODES
Weighing : On
Parts Counting : Off
Animal Weighing : Off
Percent Weighing : Off
Check Weighing : Off
G/N/T : Off
Filling : Off
Differential : Off
Formulation : Off
Statistics : Off
SQC : Off
Density : Off
UNITS
Milligram (mg) : Off
Gram : On
Kilogram : Off
Oz avdp (oz) : Off
Pound avdp (lb) : Off
Carat (ct) : Off
Penny weight (dwt) : Off
Troy OZ (ozt) : Off
Grain (GN) : Off
HK Tael (Hkt) : Off
SG Tael (SGt) : Off
ROC Tael (ROt) : Off
Scroll down using arrow button to view remaining units.