Rice Lake 920i Based Truck In/Out System - Manual (Page 9)

Supervisor Mode 5
2.3 Truck
1. Select 3 - Truck , from the Supervisor’s main menu to access the truck parameter screen.
Figure 2-6. Truck Entry Screen
2. Enter the field number to be edited on the numeric keypad. The following table lists the amount of characters
allowed for each field.
3. Using the up/down navigation keys, to scroll through the alpha-numeric to edit or enter the truck information.
4. Press Save softkey to save the values. Additional entries can be made by using the navigation keys to add
additional truck numbers.
5. To store a tare value taken from the scale, press the 2 key after selecting an ID and press enter with nothing
entered. This stores the the current weight on the scale as the tare.
6. When complete, use the Menu/Cancel softkey to go to the Supervisor Main Menu screen.
2.4 Project
1. Select 4 - Project from the Supervisor’s main menu to access the project parameters screen.
Figure 2-7. Project Entry Screen
Field Characters Allowed
ID 16 character alphanumeric
Tare Numeric (keyed or from scale)
Descrip 20 character alphanumeric
Accum Can’t edit/view only
Table 2-3. Truck Entry Character Parameters
Exit to
Weigh
10/22/07 08:05AM SCALE #1
1
2
3
4
7
6
5
ID
Tare
Descrip
Accum
Enter Selection Number
Menu/
Cancel
Trucks
Exit to
Weigh
10/22/07 08:05AM SCALE #1
1
2
3
4
7
6
5
ID
Name
Descrip 1
Descrip 2
Enter Selection Number
Menu/
Cancel
Projects
Accum